| Content | '--Complete engine kit for modified bikes.--Heavy duty metal engine body for increased durability.--Super fuel efficient, consumes only 2.5 liters of fuel per 100 kilometers.--The maximum safe speed is 54 km/h.--Comes with all the hardware needed for easy installation.--Suitable for most 24" and 26" bikes, such as mountain bikes, road bikes, cruisers, helicopters.
Description:
Product Name: Engine Kit
1. Engine type: single-cylinder, air-cooled, two-stroke gasoline engine
2. Bore size and stroke: 47mmx40mm/80CC
3. Ignition method: CDI ignition
4. Max. Power: 2.5kw/6000r/min
5. Compression ratio: 6:1
Packing list:
1 x engine
1 x oil tank
1 x silencer
1 x carburetor
1 x electronic igniter
1 x throttle control
1 x clutch control
1 x accelerator cable
1 x clutch cable
1 x chain
1 x chain guard
1 x sprocket
1 x Reactro component
1 x gasket
1 x fuel tank switch
1 x accelerator cable
Note:
1. Due to manual measurement, please allow 1-3cm error. Make sure you don't mind before bidding.
2. Due to the difference of different monitors, the picture may not reflect the actual color of the product. Thanks. |
Overview: PIONEERWORKS 3D Heat Press Machine All in One 800W, Portable Vacuum Sublimation Heat Press Transfer with Digital Controller, No Shape Limit for T-Shirt, Phone Case, Mug, Plate.LED Screen & Countdown Timer,PIONEERWORKS 3D heat press machine is designed with buttons to adjust time and temperature, with a digital display that makes it easier and faster for people of all ages to use. You can customize the temperature (104¨H~428¨H) and time (1-999s) depending on your need, you will get the result when you hear the beep at the end of the countdown
PIONEERWORKS Vacuum Heat Transfer Machine for Phone Case/ Cups/T-shirt/Pen
ALL IN ONE HEAT PRESS MACHINE
Be bold and try a new design!
This heat press machine has a new design that allows the pattern to be perfectly transferred to any item by vacuum compression. Compared to traditional one, it is no longer limited by the shape of the product, whether it's a cup, plate, phone case or even a pen, you can achieve your imagination!
No Shape Limit to DIY
This heat press machine uses a new format to reach uniform heating through 2 heat sources at the top and bottom. By the clever way of vacuuming, the shape is no longer limited, so whether it is an odd shaped cup, plate or various models of cell phone cases, the perfect transfer effect can be achieved.
Heat Press Machine for T-shirt 8.7" X 8.7"
The removable iron heat press 8.7" X 8.7" gives you the freedom to customize your t-shirt, cushion, sweater, towel, or blanket...We have prepared some transfer paper for you to try out immediately after you receive the product.
Start Your Business Right Now!
This heat press is perfect for starting your small business. Besides flat t-shirts, you can make a design in any shape of a cup, a bottle, or a phone case of any phone, which is a good idea for a gift for your child or friend.
New experience of parent-child interaction!
Easy to use and safe
We are thoughtfully equipped with an anti-scalding glove for you to protect you and your children from being burned.
4 steps to complete the transfer:
1. Place the printed transfer sticker firmly against the item and secure it with the included thermal tape.
2. Place the item in the appropriate bottle sleeve/mug press
3. Press VACUUM to pull out the air and allow the sticker to fit snugly on the surface of the product. Select the corresponding temperature and time.
4. Wait for the countdown to end, you can get a perfect DIY finished product!
Product Features:
Heat Press All IN ONE
This vacuum heat press has a new design with closed heating by vacuum, not only for flat clothes but also can perfectly transfer patterns on irregular items through vacuum compressions, such as T-shirts, pillows, bags, mugs, tumblers, bottle, mouse pad, glass or crystal plate, phone case, etc. Compared with the traditional type of heat press machine, this machine is safer and easier to move
Excellent Effect
It makes it easy to achieve flawless sublimation transfer with its stylish, space-saving, and sleek design. This stamping machine has two heat sources at the top and bottom, for even and clear transfer of the pattern onto the item
Perfect Gift
This heat press is a serious and surprising gift for craft lovers. You can use it to design your mugs, plates, clothes, and phone cases, which is also a great gift idea for family and friends. The use of this heat press machine requires easy installation, please read the manual or the video on the page in advance
Specifications£º
| Band |
PIONEERWORKS |
| Power |
800w |
| Rated Voltage |
220V-50HZ 110V-60HZ |
| TEMP. Range |
104¨H - 428¨H £¨40 ¨H - 220 ¡??/td>
|
| Time Range |
1~999 s |
| Item model number |
PD2800 |
| Cups Sizes |
3.54" Max. length: 10.23" |
| Plate Sizes |
8.7" X 8.7" Max |
| Iron Size forT-shirt |
7" x 8" |
| Product Dimensions |
16.14 x 14.96 x 13.78 inches |
| Item Weight |
20.9 pounds/9.48kg |
| Package Contents |
Host 1 (800W host),
1 plastic seat,
Sealing ring 1 set,
1 plastic frame,
Vacuum leather 2 pieces,
2800 plug holder 1,
Heat insulation pad 1,
2800 iron water plate 1,
2800 silicone tube 12*7 1,
1 pair of general high temperature gloves,
11OZ silicone cup holder 2pcs,
2800 straight cup clip 1,
1 cup holder with handle,
1 power cord,
1 manual,
Lower silicone skin 1 part, |
?
| |
Overview: GARVEE Electric Rebar Bender up to 1.3 inch with Our Electric Bender - Achieve 0-180¡ã Angles, Operate with Convenient Foot Pedal Switch, and Benefit from Powerful 3000W Motor.Ultra-Fast Bending: Bend rebar 1/4'' #2 to 1.3" #8 Grade 60(6 to 32 mm) in just 6 to 7 seconds, with a bending angle range of 0-180¡ã and a bending radius of 1.57'' / 40 mm. This electric rebar bender saves valuable person-hours and delivers excellent performance.
Product Features:
Powerful Motor
Equipped with a 3000W pure copper coil motor, this hydraulic bending machine runs quietly with low noise, reducing unnecessary wear and improving your working efficiency. The copper motor also extends the electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)
Accurate Angle Adjustment
With two slide-type angle selectors and preset angle locks, this rebar bending machine helps you accurately bend any angle from 0-180 degrees. Note that the angle of point 1 must be bigger than point 2 for normal operation during bending processing.
Sturdy and Durable Build
The electric bender machine features a sturdy iron body and durable Idler Wheel with ?78 iron Gyre Idler Wheel and ?94 Fixed Idler Wheel. This robust construction enables the machine to stand super-hard rebar with strong clamping force, reducing steel rebar waste.
Specifications£º
| Brand |
GARVEE |
| Model |
RB32 |
| Voltage |
110V |
| Power |
3000W |
| Frequency |
60Hz |
| Amps |
26A |
| Bending Angle |
0-180¡ã |
| Max. Rebar Diameter |
1-1/4'' / 32 mm #10 Grade 60 |
| Min. Rebar Diameter |
1/4'' / 6 mm #2 Grade 60 |
| Bending Speed |
6-7 Seconds |
| Bending Radius |
1.97'' / 50 mm |
| Max. Rebar Hardness |
HRC30 |
| Noise |
105 dB(A) |
| Shell Material |
Iron |
| Certificate |
CE |
| Item Dimensions(L x W x H) |
23.62 x 22.83 x 18.5'' / 60 x 58 x 47 cm |
| Packing Size(L x W x H) |
25.59 x 25.59 x 28.74'' / 65 x 65 x 73 cm |
| Gross Weight |
?400 pounds |
| Package Contents |
1 x Electric Rebar Bender
2 x Foot Pedals
3 x Tension Springs
4 x Carbon Brushes
1 x User Manual |
| Application |
Rebar, Round Steel, Flat Iron, Steel Bar Processing Plant, Construction Industry, Bridge Construction, etc |
|
Overview: GARVEE Electric Rebar Bender up to 1 inch with Our Electric Bender - Achieve 0-180¡ã Angles, Operate with Convenient Foot Pedal Switch, and Benefit from Powerful 1600W Motor.Ultra-Fast Bending, Bend rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) in just 6 to 7 seconds, with a bending angle range of 0-180¡ã and a bending radius of 1.57'' / 40 mm. This electric rebar bender saves valuable person-hours and delivers excellent performance.
Product Features:
Powerful Motor
Equipped with a 1600W pure copper coil motor, this hydraulic bending machine runs quietly with low noise, reducing unnecessary wear and improving your working efficiency. The copper motor also extends the electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)
Accurate Angle Adjustment
With two slide-type angle selectors and preset angle locks, this rebar bending machine helps you accurately bend any angle from 0-180 degrees. Note that the angle of point 1 must be bigger than point 2 for normal operation during bending processing.
Sturdy and Durable Build
The electric bender machine features a sturdy iron body and durable Idler Wheel with ?78 iron Gyre Idler Wheel and ?94 Fixed Idler Wheel. This robust construction enables the machine to stand super-hard rebar with strong clamping force, reducing steel rebar waste.
Specifications£º
| Brand |
GARVEE |
| Model |
RB25 |
| Voltage |
110-120V |
| Power |
1600W |
| Frequency |
60Hz |
| Amps |
14A |
| Bending Angle |
0-180¡ã |
| Max. Rebar Diameter |
1/4'' / 25 mm #8 Grade 60 |
| Min. Rebar Diameter |
1/4'' / 6 mm #2 Grade 60 |
| Bending Speed |
6-7 Seconds |
| Bending Radius |
1.57 '' / 40 mm |
| Max. Rebar Hardness |
HRC30 |
| Noise |
92 dB(A) |
| Shell Material |
Iron |
| Certificate |
CE |
| Item Dimensions(L x W x H) |
17.72 x 19.69 x 20.08''/45 x 50 x 51 cm |
| Packing Size(L x W x H) |
19.11 x 21.21 x 22.3''/50 x 55 x 56 cm |
| Gross Weight |
?240 pounds |
| Package Contents |
1 x Electric Rebar Bending Machine
2 x pedals
3 x tension springs
4 x carbon brushes
1 x User Manual |
| Application |
Rebar, Round Steel, Flat Iron, Steel Bar Processing Plant, Construction Industry, Bridge Construction, etc |
|
Overview: GARVEE Hanging Magnetic Sweeper 60inch Heavy-Duty Magnet Sweeper, Nail Magnet Sweeping Tool with 140 LBS Lifting Capacity, Magnet Double Magnetic Force Sweeper Unit, Hanging Magnet for Forklift.Sturdy Aluminum Casing, This Hanging Magnetic Sweeper Is Designed With A Heavy-Duty Aluminum Casing, And It Has Several Tightly-Fixed Lifting Handles That Are All Made Of Premium Steel. These High-Quality Materials Ensure It Can Be Used For Years To Come.
- Sturdy Aluminum Casing£ºThis hanging magnetic sweeper is designed with a heavy-duty aluminum casing, and it has several tightly-fixed lifting handles that are all made of premium steel. These high-quality materials ensure it can be used for years to come.
- 140 LBS Lifting Capacity£ºThis 48" magnetic sweeper covers a large area at a single time, saving effort and time. The internal magnets produce a strong magnetic force that can lift items weighing up to 140 lbs.
- Quick Releasing Lever£ºIt has one ergonomic load releasing lever, there is no need bother removing the countless sharp nails or screws with your bare hands. Once you pull it, everything will be released, which is more convenient and safer.
Clear the Way Effortlessly£ºJust put your forklift forks through the two handles, and use the eye bolts to fix them. Then drive the vehicle across your warehouse aisles, or any other place where you want to make it a clear "road". It won't miss a single nail. Wide Application£ºThis suspension-type magnetic sweeper can be used in many places, such as construction sites, factories, warehouses, etc. It is perfect for picking up nails, screws, and other sharp metals to prevent injury to workers, bystanders, or tires.
Product Features:
140 LBS Lifting Capacity
This 60" magnetic sweeper covers a large area at a single time, saving effort and time. The internal magnets produce a strong magnetic force that can lift items weighing up to 140 lbs.
Quick Releasing Lever
It has one ergonomic load releasing lever, there is no need bother removing the countless sharp nails or screws with your bare hands. Once you pull it, everything will be released, which is more convenient and safer.
Clear the Way Effortlessly
Just put your forklift forks through the two handles, and use the eye bolts to fix them. Then drive the vehicle across your warehouse aisles, or any other place where you want to make it a clear "road". It won't miss a single nail.
Specifications£º
| Brand |
GARVEE |
| Material |
Aluminum |
| Shape |
Rectangular |
| Number of Pieces |
1 |
| Pull Force |
140 Pounds |
| Net Weight |
17.6 Pounds/7.98kg |
| Package Dimensions |
49 x 7 x 5 inches |
| Package Contents |
1 x Hanging Magnetic Sweeper |
|
Reviews
There are no reviews yet.