| Content | '--Sturdy stainless steel housing cover, seal.--Small size, high efficiency and long life. Easy to use.--Powered by durable oil-cooled motor.--Widely applicable to many fields. Water pump, boasting its diverse types, is widely applied in numerous areas in our daily life.--Dimensions: (14.17 x 8.66 x 6.30)" / (36 x 22 x 16)cm (L x W x H).
Description:
Name: 1100W Stainless Steel Submersible Pump
Dimensions: (14.17 x 8.66 x 6.30)" / (36 x 22 x 16)cm (L x W x H)
Material: stainless steel
Color: Silver
Weight: 194.01oz / 5500g
Power: 1.5HP (1100W)
Current lead: UL20# 3X5M
Maximum lift: 9.5M
Maximum flow: 16000L/H (4300gph)
Passable particles: 35MM
Maximum operating temperature: 35 degrees
Connection size: 1" 1-1/4" 1-1/2"
Power supply: Durable oil-cooled motor
Packing list:
1 x 1100W Stainless Steel Submersible Pump
Note:
1. Please allow 1-3mm error due to manual measurement. Make sure you don't mind before ordering.
2. Due to the difference of different monitors, the picture may not reflect the actual color of the product. Thanks. |
Overview: GARVEE Wire Rope, 1/8" Stainless Steel Cable Wire Rope, 400FT T316 Cable Wire 7x7 Strand Core, Marine-Grade Corrosion Protection Wire Cable for Deck Railing Kit DIY Balustrades Clothesline etc.The wire rope is made of 316 stainless steel. 316 stainless steel is better than 304 stainless steel. Compared with 304 stainless steel cable, 316 stainless steel cable has stronger wear resistance, oxidation resistance and corrosion resistance. 316 stainless steel wire ropes can be used well even in harsh environments.
Wire Rope,1/8 Wire Rope,Stainless Steel 316 Wire Cable,400FT Length Aircraft Cable,7x7 Strand Core,Perfect for Cable Deck Railing Kit,Non-Magnetic Marine Grade,Outdoor,Yard,Garden or Crafts(400ft).
?Wide Applications:
- The 165FT stainless steel cable is not easily entangled and can be cut to the required length as need.
- It is sufficient for home and outdoor use,such as chandeliers,clothesline,curtains,lightning cables between trees,garden lines,fishing line,railing,boats,wind chimes,DIY light strings,fence in your backyard,etc.
?Strong Carrying Weight:
- Marine grade 316 stainless steel has ultra-high corrosion resistance and is designed for industrial and marine applications.
- It has strong rust resistance and durability;steel cables have high tensile strength,good mechanical properties,and both strength and flexibility.Stainless steel cables are stronger and can bear heavier weight.
Product Features:
Tough Constructure
7 groups of 7 strands braided together to form the wire rope , which provide flexibility and durability.7¡Á7 structure steel wire rope stand core is tightly wound and have a stronger load-bearing capacity.Each strand of steel wire rope is polished and wound to form a smooth and burr-free surface.
Multiple Use
The excellent material of the stainless steel cable makes it have a variety of uses. You can cut it to the required length according to your needs. It is suitable for a variety of home and outdoor applications. Stainless steel cables can be used to make deck railings, clotheslines, stair handrails, wind chimes, hanging lights, hanging curtains, etc.
Crimping Loop Sleeves & Cable Thimbles
The steel cable is equipped with 50Pcs crimping loop sleeve and 10Pcs thimble. The crimping ring sleeve can fix the wire rope for easy use, and the cable thimble can protect the wire rope to reduce wear during use and prolong the service life of the wire rope.
Specifications£º
| Brand |
GARVEE |
| Material |
Stainless Steel |
| Item Form |
Coil |
| Finish Type |
Polished |
| Item Dimensions LxWxH |
10.23 x 10.23 x 2.36 inches |
| Net Weight |
12.4 Pounds/5.62kg |
| Package Contents |
50pcs crimping ring
10pcs thimble |
|
Overview: GARVEE Forklift Safety Cage 36"x36" inch 1150LBS Capacity Heavy Duty Collapsible Work Platform Forklift with 4 Universal Wheels.Durable Steel, The forklift platform is crafted with heavy-duty steel for ultimate durability. The yellow coating surface features efficient anti-rust and anti-corrosion.
Product Features:
Loading Capacity
36" L x 36" W and a weight capacity of 1150 lbs, can be easily installed on the forklift
Folded Storage
Forklift safety cage easy to assemble and disassemble, fold and store when not in use, small storage space
Safe and Secure
Non-slip floor, mesh back and rails help prevent falls, give you a secure station
Specifications£º
| Brand |
GARVEE |
| Material |
Alloy Steel |
| Wheel Type |
Rubber |
| Number of Wheels |
4 |
| Part Number |
?GJMX036 |
| Size |
36" L x 36" W?
|
| Load Capacity |
1150 pound/521.63kg |
| Package Contents |
1 x Forklift cage |
|
Overview: GARVEE Electric Rebar Bender Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod (1600W Rebar Bender and Cutter).Lightning-Fast Performance: The rebar bending and cutting machine boasts exceptional performance, bending rebar from 1/4'' #2 to 1" #8 Grade 60 (6 to 25 mm) within 6 to 7 seconds and cutting rebar within 5-6 seconds. It can bend at any angle from 0-180¡ã with a bending radius of 1.57'' / 40 mm, and its maximum rebar hardness is HRC30. The hydraulic oil type used is VG46.
Product Features:
Powerful 1600W Copper Coil Motor
Equipped with a 1700W pure copper motor, this rebar cutter and bender runs quietly, has low noise and improves working efficiency, reducing unnecessary wear. The copper motor extends the operating life of the machine. It operates at a voltage of 110V, frequency of 60 Hz, with amps of 14A, and noise level of 92 dB(A).
Angle Adjustment Made Easy
The rebar bending machine has two slide-type angle selectors, making it easy to bend any angle from 0-180 degrees. Preset angle locks ensure accurate, repeatable angle bending. During bending, the angle of point 1 must be greater than point 2 for proper operation.
Durable Construction
This bar bender machine has a sturdy iron machine body and durable Idler Wheel. The ?78 iron Gyre Idler Wheel and ?94 Fixed Idler Wheel are strong and unlikely to break. It can handle super-hard rebar with strong clamping force, reducing steel rebar waste.
Specifications£º
| Brand |
GARVEE |
| Model |
RBC25 |
| Voltage |
110V |
| Power |
1600W |
| Frequency |
60Hz |
| Amps |
14A |
| Bending Angle |
0-180¡ã |
| Max. Rebar Diameter |
1" / 25 mm #8 Grade 60 |
| Min. Rebar Diameter |
1/4'' / 6 mm #2 Grade 60 |
| Bending Speed |
6-7 Seconds |
| Bending Radius |
1.57'' / 40 mm |
| Max. Rebar Hardness |
HRC30 |
| Noise |
105 dB(A) |
| Shell Material |
Iron |
| Certificate |
CE |
| Item Dimensions(L x W x H) |
19.69 x 17.72 x 31.1'' / 50 x 45 x 79 cm |
| Packing Size(L x W x H) |
22.44 x 18.9 x 38.58'' / 57 x 48 x 98 cm |
| Gross Weight |
?331 pounds |
| Package Contents |
1 x Electric Rebar Bender and Cutter
2 x Foot Pedals
3 x Tension Springs
4 x Carbon Brushes
1 x User Manual |
| Application |
Rebar, Round Steel, Flat Iron, Steel Bar Processing Plant, Construction Industry, Bridge Construction, etc |
|
Overview: GARVEE Electric Rebar Bender up to 1 inch with Our Electric Bender - Achieve 0-180¡ã Angles, Operate with Convenient Foot Pedal Switch, and Benefit from Powerful 1600W Motor.Ultra-Fast Bending, Bend rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) in just 6 to 7 seconds, with a bending angle range of 0-180¡ã and a bending radius of 1.57'' / 40 mm. This electric rebar bender saves valuable person-hours and delivers excellent performance.
Product Features:
Powerful Motor
Equipped with a 1600W pure copper coil motor, this hydraulic bending machine runs quietly with low noise, reducing unnecessary wear and improving your working efficiency. The copper motor also extends the electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)
Accurate Angle Adjustment
With two slide-type angle selectors and preset angle locks, this rebar bending machine helps you accurately bend any angle from 0-180 degrees. Note that the angle of point 1 must be bigger than point 2 for normal operation during bending processing.
Sturdy and Durable Build
The electric bender machine features a sturdy iron body and durable Idler Wheel with ?78 iron Gyre Idler Wheel and ?94 Fixed Idler Wheel. This robust construction enables the machine to stand super-hard rebar with strong clamping force, reducing steel rebar waste.
Specifications£º
| Brand |
GARVEE |
| Model |
RB25 |
| Voltage |
110-120V |
| Power |
1600W |
| Frequency |
60Hz |
| Amps |
14A |
| Bending Angle |
0-180¡ã |
| Max. Rebar Diameter |
1/4'' / 25 mm #8 Grade 60 |
| Min. Rebar Diameter |
1/4'' / 6 mm #2 Grade 60 |
| Bending Speed |
6-7 Seconds |
| Bending Radius |
1.57 '' / 40 mm |
| Max. Rebar Hardness |
HRC30 |
| Noise |
92 dB(A) |
| Shell Material |
Iron |
| Certificate |
CE |
| Item Dimensions(L x W x H) |
17.72 x 19.69 x 20.08''/45 x 50 x 51 cm |
| Packing Size(L x W x H) |
19.11 x 21.21 x 22.3''/50 x 55 x 56 cm |
| Gross Weight |
?240 pounds |
| Package Contents |
1 x Electric Rebar Bending Machine
2 x pedals
3 x tension springs
4 x carbon brushes
1 x User Manual |
| Application |
Rebar, Round Steel, Flat Iron, Steel Bar Processing Plant, Construction Industry, Bridge Construction, etc |
|
Overview: PIONEERWORKS 3D Heat Press Machine All in One 800W, Portable Vacuum Sublimation Heat Press Transfer with Digital Controller, No Shape Limit for T-Shirt, Phone Case, Mug, Plate.LED Screen & Countdown Timer,PIONEERWORKS 3D heat press machine is designed with buttons to adjust time and temperature, with a digital display that makes it easier and faster for people of all ages to use. You can customize the temperature (104¨H~428¨H) and time (1-999s) depending on your need, you will get the result when you hear the beep at the end of the countdown
PIONEERWORKS Vacuum Heat Transfer Machine for Phone Case/ Cups/T-shirt/Pen
ALL IN ONE HEAT PRESS MACHINE
Be bold and try a new design!
This heat press machine has a new design that allows the pattern to be perfectly transferred to any item by vacuum compression. Compared to traditional one, it is no longer limited by the shape of the product, whether it's a cup, plate, phone case or even a pen, you can achieve your imagination!
No Shape Limit to DIY
This heat press machine uses a new format to reach uniform heating through 2 heat sources at the top and bottom. By the clever way of vacuuming, the shape is no longer limited, so whether it is an odd shaped cup, plate or various models of cell phone cases, the perfect transfer effect can be achieved.
Heat Press Machine for T-shirt 8.7" X 8.7"
The removable iron heat press 8.7" X 8.7" gives you the freedom to customize your t-shirt, cushion, sweater, towel, or blanket...We have prepared some transfer paper for you to try out immediately after you receive the product.
Start Your Business Right Now!
This heat press is perfect for starting your small business. Besides flat t-shirts, you can make a design in any shape of a cup, a bottle, or a phone case of any phone, which is a good idea for a gift for your child or friend.
New experience of parent-child interaction!
Easy to use and safe
We are thoughtfully equipped with an anti-scalding glove for you to protect you and your children from being burned.
4 steps to complete the transfer:
1. Place the printed transfer sticker firmly against the item and secure it with the included thermal tape.
2. Place the item in the appropriate bottle sleeve/mug press
3. Press VACUUM to pull out the air and allow the sticker to fit snugly on the surface of the product. Select the corresponding temperature and time.
4. Wait for the countdown to end, you can get a perfect DIY finished product!
Product Features:
Heat Press All IN ONE
This vacuum heat press has a new design with closed heating by vacuum, not only for flat clothes but also can perfectly transfer patterns on irregular items through vacuum compressions, such as T-shirts, pillows, bags, mugs, tumblers, bottle, mouse pad, glass or crystal plate, phone case, etc. Compared with the traditional type of heat press machine, this machine is safer and easier to move
Excellent Effect
It makes it easy to achieve flawless sublimation transfer with its stylish, space-saving, and sleek design. This stamping machine has two heat sources at the top and bottom, for even and clear transfer of the pattern onto the item
Perfect Gift
This heat press is a serious and surprising gift for craft lovers. You can use it to design your mugs, plates, clothes, and phone cases, which is also a great gift idea for family and friends. The use of this heat press machine requires easy installation, please read the manual or the video on the page in advance
Specifications£º
| Band |
PIONEERWORKS |
| Power |
800w |
| Rated Voltage |
220V-50HZ 110V-60HZ |
| TEMP. Range |
104¨H - 428¨H £¨40 ¨H - 220 ¡??/td>
|
| Time Range |
1~999 s |
| Item model number |
PD2800 |
| Cups Sizes |
3.54" Max. length: 10.23" |
| Plate Sizes |
8.7" X 8.7" Max |
| Iron Size forT-shirt |
7" x 8" |
| Product Dimensions |
16.14 x 14.96 x 13.78 inches |
| Item Weight |
20.9 pounds/9.48kg |
| Package Contents |
Host 1 (800W host),
1 plastic seat,
Sealing ring 1 set,
1 plastic frame,
Vacuum leather 2 pieces,
2800 plug holder 1,
Heat insulation pad 1,
2800 iron water plate 1,
2800 silicone tube 12*7 1,
1 pair of general high temperature gloves,
11OZ silicone cup holder 2pcs,
2800 straight cup clip 1,
1 cup holder with handle,
1 power cord,
1 manual,
Lower silicone skin 1 part, |
?
|
Reviews
There are no reviews yet.