| Content | '--Universal wheels are easy to move. Lightweight and concise design, easy to operate.---Durable powder coating surface. Welded steel structure.--Produced by cutting-edge technology. Fill neck oil level gauge for bulk filling.--This 30g Gasoline Caddy allows you to dispense fuel or remove fuel from tanks without lifting heavy fuel cans and without spilling a drop.--Built to strict quality control standards, high strength and long life service.
Description:
Product Name: 30 Gallon Gasoline Car
Maximum capacity: 30 gallons
Material: Steel
Color: Black
Weight: 88.18lb / 40kg
Packing list:
1 x 30 Gallon Gasoline Car
Note:
1. Due to manual measurement, please allow 1-3cm error. Make sure you don't mind before bidding.
2. Due to the difference of different monitors, the picture may not reflect the actual color of the product. Thanks. | |
Overview: GARVEE Electric Rebar Bender up to 1.3 inch with Our Electric Bender - Achieve 0-180¡ã Angles, Operate with Convenient Foot Pedal Switch, and Benefit from Powerful 3000W Motor.Ultra-Fast Bending: Bend rebar 1/4'' #2 to 1.3" #8 Grade 60(6 to 32 mm) in just 6 to 7 seconds, with a bending angle range of 0-180¡ã and a bending radius of 1.57'' / 40 mm. This electric rebar bender saves valuable person-hours and delivers excellent performance.
Product Features:
Powerful Motor
Equipped with a 3000W pure copper coil motor, this hydraulic bending machine runs quietly with low noise, reducing unnecessary wear and improving your working efficiency. The copper motor also extends the electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)
Accurate Angle Adjustment
With two slide-type angle selectors and preset angle locks, this rebar bending machine helps you accurately bend any angle from 0-180 degrees. Note that the angle of point 1 must be bigger than point 2 for normal operation during bending processing.
Sturdy and Durable Build
The electric bender machine features a sturdy iron body and durable Idler Wheel with ?78 iron Gyre Idler Wheel and ?94 Fixed Idler Wheel. This robust construction enables the machine to stand super-hard rebar with strong clamping force, reducing steel rebar waste.
Specifications£º
| Brand |
GARVEE |
| Model |
RB32 |
| Voltage |
110V |
| Power |
3000W |
| Frequency |
60Hz |
| Amps |
26A |
| Bending Angle |
0-180¡ã |
| Max. Rebar Diameter |
1-1/4'' / 32 mm #10 Grade 60 |
| Min. Rebar Diameter |
1/4'' / 6 mm #2 Grade 60 |
| Bending Speed |
6-7 Seconds |
| Bending Radius |
1.97'' / 50 mm |
| Max. Rebar Hardness |
HRC30 |
| Noise |
105 dB(A) |
| Shell Material |
Iron |
| Certificate |
CE |
| Item Dimensions(L x W x H) |
23.62 x 22.83 x 18.5'' / 60 x 58 x 47 cm |
| Packing Size(L x W x H) |
25.59 x 25.59 x 28.74'' / 65 x 65 x 73 cm |
| Gross Weight |
?400 pounds |
| Package Contents |
1 x Electric Rebar Bender
2 x Foot Pedals
3 x Tension Springs
4 x Carbon Brushes
1 x User Manual |
| Application |
Rebar, Round Steel, Flat Iron, Steel Bar Processing Plant, Construction Industry, Bridge Construction, etc |
|
Overview: GARVEE Universal Skid Steer Mount Plate 1/4" Thick Skid Steer Plate Attachment 3000LBS Weight Capacity Quick Attach Mount Plate Adapter Loader w/Holes Easy to Weld or Bolt to Different Accessories.Heavy Duty Steel Plate, The Quick Tach Mount Plate Comprises 3/16" 50-Grade Steel By Laser Cutting, The Top Bar Is 1/3" Thickness. Its Surface Is Coated With High-Temp Spray Painting To Ensure Rust-Proof Quality. Thus, The Skid Steer Plate Attachment Features 3000 Lbs Weight Capacity, Withstanding Lousy Weather And Harsh Environment, And Serves You For A Long Time.
Product Features:
High Practicability
You can extend the uses of your tractor by transforming it into a well-rounded machine with a universal skid steer plate. It fits skid steers with the universal quick tach mounting system and tractors with the skid steer style quick tach, fit for tractors, loaders, farm machines and other city vehicles.
Easy Welding Surface
This quick attach adapter has a large surface, which is convenient for welding, making your DIY installation easier. You only need to weld or connect the attachments to the mounting plate. It's straightforward.
Effortless Installation
The 3/16" thick mounting plate is easy to install onto any attachments of skid steer or tractors. You just put the mounting plate in position and weld or bolt it onto the skid steer or tractor implement to convert. With its durable construction, the mounting plate helps you take on any job.
Specifications£º
| Brand |
GARVEE |
| Part Number |
ANZHUANGBAN2 |
| Item model number |
X1BN7Y |
| Size |
Hollow |
| Color |
Black |
| Item Package Quantity |
1 |
| Product Dimensions |
3.94 x 20.47 x 46.85 inches |
| Item Weight |
?66 pounds/29.94kg |
| Included Components |
1 x Skid Steer Mount Plate |
|
Overview: PIONEERWORKS 3D Heat Press Machine All in One 800W, Portable Vacuum Sublimation Heat Press Transfer with Digital Controller, No Shape Limit for T-Shirt, Phone Case, Mug, Plate.LED Screen & Countdown Timer,PIONEERWORKS 3D heat press machine is designed with buttons to adjust time and temperature, with a digital display that makes it easier and faster for people of all ages to use. You can customize the temperature (104¨H~428¨H) and time (1-999s) depending on your need, you will get the result when you hear the beep at the end of the countdown
PIONEERWORKS Vacuum Heat Transfer Machine for Phone Case/ Cups/T-shirt/Pen
ALL IN ONE HEAT PRESS MACHINE
Be bold and try a new design!
This heat press machine has a new design that allows the pattern to be perfectly transferred to any item by vacuum compression. Compared to traditional one, it is no longer limited by the shape of the product, whether it's a cup, plate, phone case or even a pen, you can achieve your imagination!
No Shape Limit to DIY
This heat press machine uses a new format to reach uniform heating through 2 heat sources at the top and bottom. By the clever way of vacuuming, the shape is no longer limited, so whether it is an odd shaped cup, plate or various models of cell phone cases, the perfect transfer effect can be achieved.
Heat Press Machine for T-shirt 8.7" X 8.7"
The removable iron heat press 8.7" X 8.7" gives you the freedom to customize your t-shirt, cushion, sweater, towel, or blanket...We have prepared some transfer paper for you to try out immediately after you receive the product.
Start Your Business Right Now!
This heat press is perfect for starting your small business. Besides flat t-shirts, you can make a design in any shape of a cup, a bottle, or a phone case of any phone, which is a good idea for a gift for your child or friend.
New experience of parent-child interaction!
Easy to use and safe
We are thoughtfully equipped with an anti-scalding glove for you to protect you and your children from being burned.
4 steps to complete the transfer:
1. Place the printed transfer sticker firmly against the item and secure it with the included thermal tape.
2. Place the item in the appropriate bottle sleeve/mug press
3. Press VACUUM to pull out the air and allow the sticker to fit snugly on the surface of the product. Select the corresponding temperature and time.
4. Wait for the countdown to end, you can get a perfect DIY finished product!
Product Features:
Heat Press All IN ONE
This vacuum heat press has a new design with closed heating by vacuum, not only for flat clothes but also can perfectly transfer patterns on irregular items through vacuum compressions, such as T-shirts, pillows, bags, mugs, tumblers, bottle, mouse pad, glass or crystal plate, phone case, etc. Compared with the traditional type of heat press machine, this machine is safer and easier to move
Excellent Effect
It makes it easy to achieve flawless sublimation transfer with its stylish, space-saving, and sleek design. This stamping machine has two heat sources at the top and bottom, for even and clear transfer of the pattern onto the item
Perfect Gift
This heat press is a serious and surprising gift for craft lovers. You can use it to design your mugs, plates, clothes, and phone cases, which is also a great gift idea for family and friends. The use of this heat press machine requires easy installation, please read the manual or the video on the page in advance
Specifications£º
| Band |
PIONEERWORKS |
| Power |
800w |
| Rated Voltage |
220V-50HZ 110V-60HZ |
| TEMP. Range |
104¨H - 428¨H £¨40 ¨H - 220 ¡??/td>
|
| Time Range |
1~999 s |
| Item model number |
PD2800 |
| Cups Sizes |
3.54" Max. length: 10.23" |
| Plate Sizes |
8.7" X 8.7" Max |
| Iron Size forT-shirt |
7" x 8" |
| Product Dimensions |
16.14 x 14.96 x 13.78 inches |
| Item Weight |
20.9 pounds/9.48kg |
| Package Contents |
Host 1 (800W host),
1 plastic seat,
Sealing ring 1 set,
1 plastic frame,
Vacuum leather 2 pieces,
2800 plug holder 1,
Heat insulation pad 1,
2800 iron water plate 1,
2800 silicone tube 12*7 1,
1 pair of general high temperature gloves,
11OZ silicone cup holder 2pcs,
2800 straight cup clip 1,
1 cup holder with handle,
1 power cord,
1 manual,
Lower silicone skin 1 part, |
?
| Towallmark 14-Piece Flex-Head Ratcheting Wrench Set, SAE/Metric Ratchet Wrenches Set,Cr-V Constructed, Chrome Vanadium Steel Combination Ended Standard Kit with Roll-up Storage Pouch.The combination ratchet wrenches set include 8mm, 10mm, 12mm, 13mm, 14mm, 15mm,16mm, 5/16", 3/8", 7/16" 1/2", 9/16", 5/8", 11/16". No-Skip sizing, always have the size you need.
14 Pcs Flex Head Ratcheting Wrench Set
Towallmark Wrench Set Flex-Head Ratcheting Combination Wrench Set 14 Piece SAE&Metric is ideal for different nuts and bolts.
14-piece Flex-Head Ratcheting Combination Wrench Set, Cr-V Constructed
Constructed from Cr-v steel,all of the wrenches are made of high strength vanadium steel and then chrome finished for long lasting durability. hardened and heat treated, with grey Ni-coating for rust resistance.
?
180¡ã Pivoting Head
Box end head pivots 180 degrees to easily get around obstructions. Flexible rotation is convenient for small space operation and effortless operation.
Car Repair
Bicycle Repair
Mechanic Reapir
Product Features:
180¡ãFlex-head Ratchet Head
180 degree flex head helps you to reach the awkward places where most ratchet wrenches would not reach. The 72-teeth ratchet gears need only a 5-degree working swing arc suitable for any narrow space.
Premium Material
The metric wrench set is made of heat-treated Chrome Vanadium Steel and a polished surface which ensures durability and resistance to corrosion.
Roll-up Pouch
This ratcheting wrench set comes with a premium roll-up pouch for easy organization and convenient storage.
Specifications£º
| Brand |
?Towallmark |
| Material |
?Alloy Steel |
| Item Dimensions LxWxH |
?12.99 x 3.74 x 3.54 inches |
| Item Weight |
?4.98 Pounds/2.26kg |
| Head Style |
?Flex |
| Finish Type |
?Chrome Plated |
| Operation Mode |
?Mechanical |
| Manufacturer |
?Towallmark |
| Part Number |
?LJL-20210409-FBA-PHO_0RA0WJNP-US |
| Item Weight |
?4.98 pounds |
| Product Dimensions |
?12.99 x 3.74 x 3.54 inches |
| Item model number |
?LJL-20210409-FBA-PHO_0RA0WJNP-US |
| Size |
?14-Piece Flex-Head SAE/Metric |
| Finish |
?Chrome Plated |
| Measurement System |
?Inch, Metric |
| Package Contents |
The combination ratchet wrenches set include 8mm, 10mm, 12mm, 13mm, 14mm, 15mm,16mm, 5/16", 3/8", 7/16" 1/2", 9/16", 5/8", 11/16". |
?
|
Reviews
There are no reviews yet.