| Content | '--Fully automatic full metal detector: your detector detects all kinds of metal objects.--LCD with light: it can improve metal identification at night or outside--Object Recognition: Detected objects are displayed on the LCD screen. You can immediately decide if an object is worth recycling--Unwanted Object Elimination: You can set the detector not to respond to certain objects--Headphone jack: Provides a headphone connection. Both stereo and mono headphones can be used
Description:
Name: Metal Detector
Power supply: 9Vx2 battery (not included)
Sensitivity: >18cm (US quarter)
Frequency: 6.6KHz±0.2KHz
Operating Mode: Fully Automatic and Full Metal Detector
Coil: 10" waterproof search coil
Sound: 3-tone audio
Detected Indication: LCD Display
Battery Status Indicator: Yes
Distinction: ferrous and non-ferrous metals
Color: black and yellow
Features:
1. Unique Tones of Targets: When there is an object, you don't have to keep looking at the LCD display. When detected, a unique tone corresponding to the target will be produced. You can even search when there is little or no light
2. No clumsy slack cables: Hidden search coil cable (connecting control unit and search coil) avoids tangling and facilitates rod length adjustment
3. Volume Control - Used to adjust the output volume of speakers or headphones
4. Battery Status Indicator: Shows the status of the battery in the battery compartment
5. Waterproof Search Coil: Lets you use the detector in shallow water
6. Adjustable Stem - Allows you to adjust the length of the detector for comfortable use. The miniature plug connecting the search coil and the controller unit is made of metal, making the plug more reliable
7. Armrests and bars: designed to take pressure off the forearm. Nylon brackets are to further secure the sliding of the hand compartment after the arm has held the detector for an extended period of time
8. Headlights: help you can also use at night
Packing list:
1 x Metal Detector
1 x Shovel
1 x Headphone
1 x Bag
1 x Headlight
Note:
Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.
Manual measuring,please allow 1~3mm error,thank you. |
Overview: GARVEE 60" Bucket Clamp on Debris Forks, Heavy Duty Clamp on Pallet Fork 4000 lbs Capacity Bucket Forks Attachments Fit for Loader Bucket Skidsteer Tractor.Bolted Design, Tractor bucket teeth' s inside width is 60", suitable for most loaders. It uses bolted design and plays the role of connection and fixation. Each handle and socket is equipped with a 5/8 "set screw, you can use a 5/16" hexagon wrench to set the screw.
Product Features:
Replaceable Tooth
The bucket tooth bar is equipped with 6 teeth, the clearance is 9.84", which is replaceable and interchangeable. Generally, the broken part of the bucket tooth is a tooth tip, which means that you can replace a broken tooth instead of buying a brand new track.
Protective Coating
The surface of the bucket tooth bar is treated with a metal protective coating, which insulates the metal from the air and keeps other substances from reacting with the metal. It exempts from wearing, rusting, and corrosion, thus extending the service life.
Q345 Steel Alloy
The loader bucket tooth bar adopts Q345 steel material, also known as alloy steel, which has higher strength than carbon steel. Its low carbon content and low alloying element content effectively penetrate compacted soil and other materials.
Specifications£º
| Band |
GARVEE |
| Part Number |
?CHANDOU |
| Item model number |
?WYVTDC |
| Color |
?Black |
| Item Package Quantity |
?1 |
| Product Dimensions |
?6.69 x 15.35 x 60.63 inches |
| Item Weight |
?90 pounds/40.82kg
|
| Included Components |
?1 x Bucket Clamp on Debris Forks |
|
The 60 inch pallet forks is compatible with most loader bucket skid steer tractors.
The stabilizer bar can be adjusted from 24.8" to 40.15". The 60 inch forks for tractor bucket is made of coated welded steel construction, sturdy and durable.
- Security and Durable Materials
It is from coated welded steel construction. The use of T-shaped reinforcement plate makes the pallet fork more firm and reliable and say goodbye to deformation.
- Easy Installation &Versatile
It's simply slide the fork over the cutting edge of the bucket, and clamp it down to lock. It can haul logs, lumber, and firewood, move fence posts, hay bales, clear debris and brush. The versatility of our pallet forks is endless.
Description £º
Size Specification
Load:4000lbs Max
Total Length: 60"
Fork Length: 43"
Fork Width: 3.7"
Fork Height: 1.97"
Bucket lip gap: 2.48"
Adjustable stabilizer bar: can be adjusted from 18" to 34" W
?
Package List
- 1 x Pallet Forks
- 1 x Adjustable Stabilizer Bar
- 1 x User Manual
Specifications£º
|
Brand
|
GARVEE
|
|
Product Name
|
Clamp on Pallet Forks
|
|
Product Model
|
60" 4000lbs Adjustable
|
|
Color
|
Black
|
|
Material
|
Coated welded steel construction
|
|
Capacity
|
4000lbs
|
|
Pallet Forks Size
|
60 inch
|
|
Adjustable Stabilizer Bar
|
YES
|
|
Power Source
|
hand_powered
|
|
Application
|
Loader Bucket Skidsteer Tractor etc.
|
|
Item Weight
|
94.6 pounds/42.90KG
|
|
Product Dimensions
|
??????60.24 x 12.99 x 5.12 inches
|
|
Package Contents
|
1 x Pallet Forks
1 x Adjustable Stabilizer Bar
1 x User Manual
|
Customer questions & answers£º
Question: Can this be applied to my tractor?
Answer: Yes, of course
Question: Is this easy to install?
Answer: Yes, it is very simple, if you have any questions during installation, please contact us |
Overview: GARVEE Electric Rebar Bender up to 1 inch with Our Electric Bender - Achieve 0-180¡ã Angles, Operate with Convenient Foot Pedal Switch, and Benefit from Powerful 1600W Motor.Ultra-Fast Bending, Bend rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) in just 6 to 7 seconds, with a bending angle range of 0-180¡ã and a bending radius of 1.57'' / 40 mm. This electric rebar bender saves valuable person-hours and delivers excellent performance.
Product Features:
Powerful Motor
Equipped with a 1600W pure copper coil motor, this hydraulic bending machine runs quietly with low noise, reducing unnecessary wear and improving your working efficiency. The copper motor also extends the electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)
Accurate Angle Adjustment
With two slide-type angle selectors and preset angle locks, this rebar bending machine helps you accurately bend any angle from 0-180 degrees. Note that the angle of point 1 must be bigger than point 2 for normal operation during bending processing.
Sturdy and Durable Build
The electric bender machine features a sturdy iron body and durable Idler Wheel with ?78 iron Gyre Idler Wheel and ?94 Fixed Idler Wheel. This robust construction enables the machine to stand super-hard rebar with strong clamping force, reducing steel rebar waste.
Specifications£º
| Brand |
GARVEE |
| Model |
RB25 |
| Voltage |
110-120V |
| Power |
1600W |
| Frequency |
60Hz |
| Amps |
14A |
| Bending Angle |
0-180¡ã |
| Max. Rebar Diameter |
1/4'' / 25 mm #8 Grade 60 |
| Min. Rebar Diameter |
1/4'' / 6 mm #2 Grade 60 |
| Bending Speed |
6-7 Seconds |
| Bending Radius |
1.57 '' / 40 mm |
| Max. Rebar Hardness |
HRC30 |
| Noise |
92 dB(A) |
| Shell Material |
Iron |
| Certificate |
CE |
| Item Dimensions(L x W x H) |
17.72 x 19.69 x 20.08''/45 x 50 x 51 cm |
| Packing Size(L x W x H) |
19.11 x 21.21 x 22.3''/50 x 55 x 56 cm |
| Gross Weight |
?240 pounds |
| Package Contents |
1 x Electric Rebar Bending Machine
2 x pedals
3 x tension springs
4 x carbon brushes
1 x User Manual |
| Application |
Rebar, Round Steel, Flat Iron, Steel Bar Processing Plant, Construction Industry, Bridge Construction, etc |
|
The 60 inch pallet forks is compatible with most loader bucket skid steer tractors. The 60 inch forks for tractor bucket is made of coated welded steel construction, sturdy and durable.
- Security and Durable Materials
It is from coated welded steel construction. The use of T-shaped reinforcement plate makes the pallet fork more firm and reliable and say goodbye to deformation.
- Easy Installation &Versatile
It's simply slide the fork over the cutting edge of the bucket, and clamp it down to lock. It can haul logs, lumber, and firewood, move fence posts, hay bales, clear debris and brush. The versatility of our pallet forks is endless.
Description £º
?
Size Specification
Load:4000lbs Max
Total Length: 60"
Fork Length: 43"
Fork Width: 3.7"
Fork Height: 1.97"
Bucket lip gap: 2.48"
Adjustable stabilizer bar: NO
?
Package List
- 1 x Pallet Forks
- 1 x User Manual
Specifications:
|
Brand
|
GARVEE
|
|
Product Name
|
Clamp on Pallet Forks
|
|
Product Model
|
60" 4000lbs
|
|
Color
|
Black
|
|
Material
|
Coated welded steel construction
|
|
Capacity
|
4000lbs
|
|
Pallet Forks Size
|
60 inch
|
|
Adjustable Stabilizer Bar
|
NO
|
|
Power Source
|
hand_powered
|
|
Application
|
Loader Bucket Skidsteer Tractor etc.
|
|
Item Weight
|
?81.4 pounds/36.92KG
|
|
Product Dimensions
|
??????60.24 x 12.99 x 5.12 inches
|
|
Package Contents
|
1 x Pallet Forks
1 x User Manual
|
|
Overview: GARVEE Universal Skid Steer Mount Plate 1/4" Thick Skid Steer Plate Attachment 3000LBS Weight Capacity Quick Attach Mount Plate Adapter Loader w/Holes Easy to Weld or Bolt to Different Accessories.Heavy Duty Steel Plate, The Quick Tach Mount Plate Comprises 3/16" 50-Grade Steel By Laser Cutting, The Top Bar Is 1/3" Thickness. Its Surface Is Coated With High-Temp Spray Painting To Ensure Rust-Proof Quality. Thus, The Skid Steer Plate Attachment Features 3000 Lbs Weight Capacity, Withstanding Lousy Weather And Harsh Environment, And Serves You For A Long Time.
Product Features:
High Practicability
You can extend the uses of your tractor by transforming it into a well-rounded machine with a universal skid steer plate. It fits skid steers with the universal quick tach mounting system and tractors with the skid steer style quick tach, fit for tractors, loaders, farm machines and other city vehicles.
Easy Welding Surface
This quick attach adapter has a large surface, which is convenient for welding, making your DIY installation easier. You only need to weld or connect the attachments to the mounting plate. It's straightforward.
Effortless Installation
The 3/16" thick mounting plate is easy to install onto any attachments of skid steer or tractors. You just put the mounting plate in position and weld or bolt it onto the skid steer or tractor implement to convert. With its durable construction, the mounting plate helps you take on any job.
Specifications£º
| Brand |
GARVEE |
| Part Number |
ANZHUANGBAN2 |
| Item model number |
X1BN7Y |
| Size |
Hollow |
| Color |
Black |
| Item Package Quantity |
1 |
| Product Dimensions |
3.94 x 20.47 x 46.85 inches |
| Item Weight |
?66 pounds/29.94kg |
| Included Components |
1 x Skid Steer Mount Plate |
|
Reviews
There are no reviews yet.