| Content |
Overview: GARVEE Using ABS durable material and high quality nano nozzle design, it can spray real mist to achieve atomization effect. Quick fogging, large amount of fog, super fine spray. We are equipped with a USB charging cable, which can be fully charged in about 120 minutes. It has a variety of charging methods, such as portable power banks, car chargers, adapters, etc.
?High-Quality Spray Port, Use Pa Heat Resistant Material, Fast Fogging, Large Amount of Mist.
?Porous Heat Dissipation, The Device Releases A Large Amount Of -Spray While The Hull Intelligent Heat Dissipation.
? Adjust The Quantity Of Fog According To The Softness.
?You Can Get Your Favorite Essential Oils To Achieve Various Good Effects.
?Smart Temperature Control, Prevent Dry Heating.
Product Features:
Cordless Disinfectant Mister
This electrostatic sprayer for disinfectant has a built-in 4800mAh rechargeable battery. 110V-240V universal rated voltage, safe and convenient. Fully charged within 3 hours, continuous working time is up to 2 hours. Equipped with 4 powerful disinfection lamps, which effectively assist the sterilization function. The use of 0.26nm nano spray with negative ions can make disinfection and sterilization more thorough.
Touch Switch Adjustment
The disinfection sprayer adopts smarter touch adjustment, and the size of the aerosol can be controlled without rotating the knob. Just use the touch screen "L" and "H" to adjust the spray volume, and one key can complete the conversion. The spray distance can reach 2 meters, which can meet the needs of spray disinfection in many situations.
Lightweight And Easy To Use
This sprayer is lighter and less noisy than other large sprayers, which makes it more suitable for daily use in offices and commercial places, even during working hours. The body weight of the sprayer is only 0.5kg. Equipped with a 300ML£¨10.2oz£© container, this weight design is convenient for men and women to operate, it will not feel soreness in the arm during long-term operation, and it is very convenient to carry.
Specifications£º
| Band |
GARVEE? |
| Product category |
sprayer |
| Rated voltage |
110-240V |
| Rated power |
10W |
| Battery capacity |
4800 mA (removable battery) |
| Power supply voltage |
DC5V |
| Use time |
2 hours |
| Charging time |
3 hours |
| Sustainable use time |
40 minutes |
| Water bottle capacity |
300ml |
| Product packaging volume |
23.8*20.2*6.8cm |
| Packing list |
1 X 300ml sprayer 1 X Charging Cable 1 X Product Manual |
|
Overview: GARVEE Electric Rebar Bender up to 1 inch with Our Electric Bender - Achieve 0-180¡ã Angles, Operate with Convenient Foot Pedal Switch, and Benefit from Powerful 1600W Motor.Ultra-Fast Bending, Bend rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) in just 6 to 7 seconds, with a bending angle range of 0-180¡ã and a bending radius of 1.57'' / 40 mm. This electric rebar bender saves valuable person-hours and delivers excellent performance.
Product Features:
Powerful Motor
Equipped with a 1600W pure copper coil motor, this hydraulic bending machine runs quietly with low noise, reducing unnecessary wear and improving your working efficiency. The copper motor also extends the electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)
Accurate Angle Adjustment
With two slide-type angle selectors and preset angle locks, this rebar bending machine helps you accurately bend any angle from 0-180 degrees. Note that the angle of point 1 must be bigger than point 2 for normal operation during bending processing.
Sturdy and Durable Build
The electric bender machine features a sturdy iron body and durable Idler Wheel with ?78 iron Gyre Idler Wheel and ?94 Fixed Idler Wheel. This robust construction enables the machine to stand super-hard rebar with strong clamping force, reducing steel rebar waste.
Specifications£º
| Brand |
GARVEE |
| Model |
RB25 |
| Voltage |
110-120V |
| Power |
1600W |
| Frequency |
60Hz |
| Amps |
14A |
| Bending Angle |
0-180¡ã |
| Max. Rebar Diameter |
1/4'' / 25 mm #8 Grade 60 |
| Min. Rebar Diameter |
1/4'' / 6 mm #2 Grade 60 |
| Bending Speed |
6-7 Seconds |
| Bending Radius |
1.57 '' / 40 mm |
| Max. Rebar Hardness |
HRC30 |
| Noise |
92 dB(A) |
| Shell Material |
Iron |
| Certificate |
CE |
| Item Dimensions(L x W x H) |
17.72 x 19.69 x 20.08''/45 x 50 x 51 cm |
| Packing Size(L x W x H) |
19.11 x 21.21 x 22.3''/50 x 55 x 56 cm |
| Gross Weight |
?240 pounds |
| Package Contents |
1 x Electric Rebar Bending Machine
2 x pedals
3 x tension springs
4 x carbon brushes
1 x User Manual |
| Application |
Rebar, Round Steel, Flat Iron, Steel Bar Processing Plant, Construction Industry, Bridge Construction, etc |
|
Overview: GARVEE Universal Skid Steer Mount Plate 1/4" Thick Skid Steer Plate Attachment 3000LBS Weight Capacity Quick Attach Mount Plate Adapter Loader w/Holes Easy to Weld or Bolt to Different Accessories.Heavy Duty Steel Plate, The Quick Tach Mount Plate Comprises 3/16" 50-Grade Steel By Laser Cutting, The Top Bar Is 1/3" Thickness. Its Surface Is Coated With High-Temp Spray Painting To Ensure Rust-Proof Quality. Thus, The Skid Steer Plate Attachment Features 3000 Lbs Weight Capacity, Withstanding Lousy Weather And Harsh Environment, And Serves You For A Long Time.
Product Features:
High Practicability
You can extend the uses of your tractor by transforming it into a well-rounded machine with a universal skid steer plate. It fits skid steers with the universal quick tach mounting system and tractors with the skid steer style quick tach, fit for tractors, loaders, farm machines and other city vehicles.
Easy Welding Surface
This quick attach adapter has a large surface, which is convenient for welding, making your DIY installation easier. You only need to weld or connect the attachments to the mounting plate. It's straightforward.
Effortless Installation
The 3/16" thick mounting plate is easy to install onto any attachments of skid steer or tractors. You just put the mounting plate in position and weld or bolt it onto the skid steer or tractor implement to convert. With its durable construction, the mounting plate helps you take on any job.
Specifications£º
| Brand |
GARVEE |
| Part Number |
ANZHUANGBAN2 |
| Item model number |
X1BN7Y |
| Size |
Hollow |
| Color |
Black |
| Item Package Quantity |
1 |
| Product Dimensions |
3.94 x 20.47 x 46.85 inches |
| Item Weight |
?66 pounds/29.94kg |
| Included Components |
1 x Skid Steer Mount Plate |
|
Overview: GARVEE Electric Rebar Bender up to 1.3 inch with Our Electric Bender - Achieve 0-180¡ã Angles, Operate with Convenient Foot Pedal Switch, and Benefit from Powerful 3000W Motor.Ultra-Fast Bending: Bend rebar 1/4'' #2 to 1.3" #8 Grade 60(6 to 32 mm) in just 6 to 7 seconds, with a bending angle range of 0-180¡ã and a bending radius of 1.57'' / 40 mm. This electric rebar bender saves valuable person-hours and delivers excellent performance.
Product Features:
Powerful Motor
Equipped with a 3000W pure copper coil motor, this hydraulic bending machine runs quietly with low noise, reducing unnecessary wear and improving your working efficiency. The copper motor also extends the electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)
Accurate Angle Adjustment
With two slide-type angle selectors and preset angle locks, this rebar bending machine helps you accurately bend any angle from 0-180 degrees. Note that the angle of point 1 must be bigger than point 2 for normal operation during bending processing.
Sturdy and Durable Build
The electric bender machine features a sturdy iron body and durable Idler Wheel with ?78 iron Gyre Idler Wheel and ?94 Fixed Idler Wheel. This robust construction enables the machine to stand super-hard rebar with strong clamping force, reducing steel rebar waste.
Specifications£º
| Brand |
GARVEE |
| Model |
RB32 |
| Voltage |
110V |
| Power |
3000W |
| Frequency |
60Hz |
| Amps |
26A |
| Bending Angle |
0-180¡ã |
| Max. Rebar Diameter |
1-1/4'' / 32 mm #10 Grade 60 |
| Min. Rebar Diameter |
1/4'' / 6 mm #2 Grade 60 |
| Bending Speed |
6-7 Seconds |
| Bending Radius |
1.97'' / 50 mm |
| Max. Rebar Hardness |
HRC30 |
| Noise |
105 dB(A) |
| Shell Material |
Iron |
| Certificate |
CE |
| Item Dimensions(L x W x H) |
23.62 x 22.83 x 18.5'' / 60 x 58 x 47 cm |
| Packing Size(L x W x H) |
25.59 x 25.59 x 28.74'' / 65 x 65 x 73 cm |
| Gross Weight |
?400 pounds |
| Package Contents |
1 x Electric Rebar Bender
2 x Foot Pedals
3 x Tension Springs
4 x Carbon Brushes
1 x User Manual |
| Application |
Rebar, Round Steel, Flat Iron, Steel Bar Processing Plant, Construction Industry, Bridge Construction, etc |
|
Overview: GARVEE Forklift Safety Cage 36"x36" inch 1150LBS Capacity Heavy Duty Collapsible Work Platform Forklift with 4 Universal Wheels.Durable Steel, The forklift platform is crafted with heavy-duty steel for ultimate durability. The yellow coating surface features efficient anti-rust and anti-corrosion.
Product Features:
Loading Capacity
36" L x 36" W and a weight capacity of 1150 lbs, can be easily installed on the forklift
Folded Storage
Forklift safety cage easy to assemble and disassemble, fold and store when not in use, small storage space
Safe and Secure
Non-slip floor, mesh back and rails help prevent falls, give you a secure station
Specifications£º
| Brand |
GARVEE |
| Material |
Alloy Steel |
| Wheel Type |
Rubber |
| Number of Wheels |
4 |
| Part Number |
?GJMX036 |
| Size |
36" L x 36" W?
|
| Load Capacity |
1150 pound/521.63kg |
| Package Contents |
1 x Forklift cage |
|
Overview: TOWALLMARK 12.5 Amp Rotary Hammer Drill, 1-1/4 Inch SDS-Plus 4 in 1 Multi-functional Heavy Duty hammer drill, Safety Clutch, Drill Chuck, for Concrete, Tile, Wall, Stones, Cement and Metal.Two Types Of Drill, Chuck SDS Plus drill chucks fit all SDS-PLUS drill bits to meet your needs.Towallmark is also equipped with a quick-release chuck, which can hold drills with a diameter of 2-13mm. Two types of drill chuck to suit your job.
   
360¡ã Auxiliary Handle
The SDS Plus hammer drill with extra auxiliary handle provides more versatility for the different and complex work. You can adjust the handle to any angle for your needs.
Heat Dissipation System
For tough tasks and long run time, a large heat dissipation system is a bonus that can extend the power tools' lifetime and secure continuous work of the motor.
Large Rubber Handle
Large rubber handle offers you stable and comfortable handling-feeling when you are drilling, demolishing, chipping. It is anti-slip, cushion your hands from secondary vibrations.
Product Features:
Powerful Motor & Heavy Duty
Towallmark power rotary hammer drill features a 12.5Amp(1500W) industrial motor, which delivers 7 JOULES (5.2 ft./lbs) impact energy and 6-level precise variable speed 0-920RPM, 0-4400 BPM. With a high-temperature resistance upgraded motor, it will not burn out even if works for a long time. Demanding heavy-duty projects on concrete, masonry, stone, metal, etc will be completed with ease.
More Advanced 1/2 Inch Quick
CHANGE CHUCK ADAPTER- What's more advanced, we have an extra exclusive design 1/2 inch(13mm) quick-release chuck adapter, you can change other non-SDS-Plus bits more quickly and easily, ensure a time-saving and convenient use. Towallmark rotary hammer is ideal for various projects on wood, cement, brick, metal, etc.
Four Functions In 1 Knob
Four function modes can be selected by just turning the dial at ease: Drilling(work on steel, wood, etc), Hammer Drilling(heavy duty work on concrete, brick, etc), Chiseling(chipping work on the hard surface), and Chisel Position Adjustment. The Quick switching of function modes provides greater productivity.
Specifications
| Brand |
TOWALLMARK |
| Power Source |
?Corded Electric |
| Maximum Rotational Speed |
?920 RPM |
| Voltage |
?120 Volts |
| Amperage |
?12.5 Amps |
| Special Feature |
?Variable Speed |
| Number of Speeds |
?6 |
| Speed |
?920 RPM |
| Item Weight |
?5.4 Kilograms |
| Part Number |
?RotaryHammer-RH01 |
| Item model number |
?RH01 |
| Size |
?12.5A |
| Wattage |
?1500 watts |
| Item Package Quantity |
?15 |
| Cord Length |
?2 Meters |
| Special Features |
?Variable Speed |
| Package Dimensions |
?16.77 x 13.23 x 5.35 inches |
| Item Weight |
?11.88 pounds/5.38kg |
| Included Components |
?1x quick-release Drill chuck
1x SDS Plus Point Chisel
3x??SDS Plus Drill Bits(8/10/12mm)
1x?Suitcase, 1* flat chisel
1x?SDS Plus Power Rotary Hammer |
|
Reviews
There are no reviews yet.