| Content |
A complete knife sharpening kit for your family!
A good wet stone sharpening kit can meet your needs for over ten years.
We have completely equipped you with whetstone, flattening stone, angle guide, bamboo base and anti cutting gloves, and then protect your safety colleagues, so that you can polish your knives most efficiently and quickly.
  
|
|
2 Side Grit 1000/6000 Water Stone
It can meet all the needs of daily use of tools and sharpen your tools quickly and efficiently.
If there are higher requirements for knife setting, you can consider our another whetstone kit 400/1000 3000/8000. |
A Dedicated Bamboo Base
A bamboo base increases the friction with the ground, and the grindstone can be put into the base, which allows you to grind your knife safely and easily.
An angle guide helps you determine the angle if you are a beginner. |
|
|
|
Anti-Cutting Gloves
A family only needs a set of whetstones, so we have equipped you with professional flattening stones, in order to enable you to use our sharpening stone for a long time.
|
Specifications??/strong>
| Brand |
TOWALLMARK |
| Model Number |
0TV8W5VJ |
| Color |
White |
| Net Weight |
3.48 pounds |
| Package Dimensions |
10.24 x 4.53 x 3.98 inches |
| Package Contents |
1 x Double Sides Grit Sharpening Stone 1000/6000
1 x Flattening stone
1 x Angle Guide
2 x Anti-cut Gloves
1 x Bamboo base |
|
Overview: GARVEE Electric Rebar Bender up to 1.3 inch with Our Electric Bender - Achieve 0-180¡ã Angles, Operate with Convenient Foot Pedal Switch, and Benefit from Powerful 3000W Motor.Ultra-Fast Bending: Bend rebar 1/4'' #2 to 1.3" #8 Grade 60(6 to 32 mm) in just 6 to 7 seconds, with a bending angle range of 0-180¡ã and a bending radius of 1.57'' / 40 mm. This electric rebar bender saves valuable person-hours and delivers excellent performance.
Product Features:
Powerful Motor
Equipped with a 3000W pure copper coil motor, this hydraulic bending machine runs quietly with low noise, reducing unnecessary wear and improving your working efficiency. The copper motor also extends the electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)
Accurate Angle Adjustment
With two slide-type angle selectors and preset angle locks, this rebar bending machine helps you accurately bend any angle from 0-180 degrees. Note that the angle of point 1 must be bigger than point 2 for normal operation during bending processing.
Sturdy and Durable Build
The electric bender machine features a sturdy iron body and durable Idler Wheel with ?78 iron Gyre Idler Wheel and ?94 Fixed Idler Wheel. This robust construction enables the machine to stand super-hard rebar with strong clamping force, reducing steel rebar waste.
Specifications£º
| Brand |
GARVEE |
| Model |
RB32 |
| Voltage |
110V |
| Power |
3000W |
| Frequency |
60Hz |
| Amps |
26A |
| Bending Angle |
0-180¡ã |
| Max. Rebar Diameter |
1-1/4'' / 32 mm #10 Grade 60 |
| Min. Rebar Diameter |
1/4'' / 6 mm #2 Grade 60 |
| Bending Speed |
6-7 Seconds |
| Bending Radius |
1.97'' / 50 mm |
| Max. Rebar Hardness |
HRC30 |
| Noise |
105 dB(A) |
| Shell Material |
Iron |
| Certificate |
CE |
| Item Dimensions(L x W x H) |
23.62 x 22.83 x 18.5'' / 60 x 58 x 47 cm |
| Packing Size(L x W x H) |
25.59 x 25.59 x 28.74'' / 65 x 65 x 73 cm |
| Gross Weight |
?400 pounds |
| Package Contents |
1 x Electric Rebar Bender
2 x Foot Pedals
3 x Tension Springs
4 x Carbon Brushes
1 x User Manual |
| Application |
Rebar, Round Steel, Flat Iron, Steel Bar Processing Plant, Construction Industry, Bridge Construction, etc |
|
The 60 inch pallet forks is compatible with most loader bucket skid steer tractors. The 60 inch forks for tractor bucket is made of coated welded steel construction, sturdy and durable.
- Security and Durable Materials
It is from coated welded steel construction. The use of T-shaped reinforcement plate makes the pallet fork more firm and reliable and say goodbye to deformation.
- Easy Installation &Versatile
It's simply slide the fork over the cutting edge of the bucket, and clamp it down to lock. It can haul logs, lumber, and firewood, move fence posts, hay bales, clear debris and brush. The versatility of our pallet forks is endless.
Description £º
?
Size Specification
Load:4000lbs Max
Total Length: 60"
Fork Length: 43"
Fork Width: 3.7"
Fork Height: 1.97"
Bucket lip gap: 2.48"
Adjustable stabilizer bar: NO
?
Package List
- 1 x Pallet Forks
- 1 x User Manual
Specifications:
|
Brand
|
GARVEE
|
|
Product Name
|
Clamp on Pallet Forks
|
|
Product Model
|
60" 4000lbs
|
|
Color
|
Black
|
|
Material
|
Coated welded steel construction
|
|
Capacity
|
4000lbs
|
|
Pallet Forks Size
|
60 inch
|
|
Adjustable Stabilizer Bar
|
NO
|
|
Power Source
|
hand_powered
|
|
Application
|
Loader Bucket Skidsteer Tractor etc.
|
|
Item Weight
|
?81.4 pounds/36.92KG
|
|
Product Dimensions
|
??????60.24 x 12.99 x 5.12 inches
|
|
Package Contents
|
1 x Pallet Forks
1 x User Manual
|
|
Overview: GARVEE Skid Steer Mount Plate Thick Skid Steer Attachment Plate Steel Quick Attachment Loader Plate with 3 Additional Welding Rods Easy to Weld or Bolt to Different Accessories.Great Compatibility, This skid steer mount plate is universally compatible with loaders, tractors and other vehicles with an internal width up to 45", including John Deere, Kubota, Bobcat & Mahindra.
Product Features:
Sturdy Structural Steel
The quick tach mount plate is built with heavy-duty grade 50 structural steel, therefore, it is capable of handling all kinds of loading work. The polished surface resists rust and corrosion, durable for long-lasting use.
Effortless Installation
The skid steer plate attachment can be directly hooked up to your tractor, loader and other machines, and then you can weld it to any attachment like hay spears, plows, forks, etc.
Firmly Welded
Each part of our skid steer attachments has been firmly welded and has passed a series of quality tests, so there is not worry about it breaking apart. It is more stable and more reliable.
Specifications£º
| Band |
GARVEE |
| Part Number |
?ANZHUANGBAN1 |
| Item model number |
?X2S3RF |
| Size |
?Adapter |
| Color |
?Black |
| Item Package Quantity |
?1 |
| Batteries Required |
?No |
| Product Dimensions |
?3.94 x 18.9 x 46.06 inches |
| Item Weight |
?54 pounds/24.49kg |
| Package Contents |
?1 x Skid Steer Mount Plate |
|
Overview: GARVEE Hanging Magnetic Sweeper 60inch Heavy-Duty Magnet Sweeper, Nail Magnet Sweeping Tool with 140 LBS Lifting Capacity, Magnet Double Magnetic Force Sweeper Unit, Hanging Magnet for Forklift.Sturdy Aluminum Casing, This Hanging Magnetic Sweeper Is Designed With A Heavy-Duty Aluminum Casing, And It Has Several Tightly-Fixed Lifting Handles That Are All Made Of Premium Steel. These High-Quality Materials Ensure It Can Be Used For Years To Come.
- Sturdy Aluminum Casing£ºThis hanging magnetic sweeper is designed with a heavy-duty aluminum casing, and it has several tightly-fixed lifting handles that are all made of premium steel. These high-quality materials ensure it can be used for years to come.
- 140 LBS Lifting Capacity£ºThis 48" magnetic sweeper covers a large area at a single time, saving effort and time. The internal magnets produce a strong magnetic force that can lift items weighing up to 140 lbs.
- Quick Releasing Lever£ºIt has one ergonomic load releasing lever, there is no need bother removing the countless sharp nails or screws with your bare hands. Once you pull it, everything will be released, which is more convenient and safer.
Clear the Way Effortlessly£ºJust put your forklift forks through the two handles, and use the eye bolts to fix them. Then drive the vehicle across your warehouse aisles, or any other place where you want to make it a clear "road". It won't miss a single nail. Wide Application£ºThis suspension-type magnetic sweeper can be used in many places, such as construction sites, factories, warehouses, etc. It is perfect for picking up nails, screws, and other sharp metals to prevent injury to workers, bystanders, or tires.
Product Features:
140 LBS Lifting Capacity
This 60" magnetic sweeper covers a large area at a single time, saving effort and time. The internal magnets produce a strong magnetic force that can lift items weighing up to 140 lbs.
Quick Releasing Lever
It has one ergonomic load releasing lever, there is no need bother removing the countless sharp nails or screws with your bare hands. Once you pull it, everything will be released, which is more convenient and safer.
Clear the Way Effortlessly
Just put your forklift forks through the two handles, and use the eye bolts to fix them. Then drive the vehicle across your warehouse aisles, or any other place where you want to make it a clear "road". It won't miss a single nail.
Specifications£º
| Brand |
GARVEE |
| Material |
Aluminum |
| Shape |
Rectangular |
| Number of Pieces |
1 |
| Pull Force |
140 Pounds |
| Net Weight |
17.6 Pounds/7.98kg |
| Package Dimensions |
49 x 7 x 5 inches |
| Package Contents |
1 x Hanging Magnetic Sweeper |
|
Overview: PIONEERWORKS 3D Heat Press Machine All in One 800W, Portable Vacuum Sublimation Heat Press Transfer with Digital Controller, No Shape Limit for T-Shirt, Phone Case, Mug, Plate.LED Screen & Countdown Timer,PIONEERWORKS 3D heat press machine is designed with buttons to adjust time and temperature, with a digital display that makes it easier and faster for people of all ages to use. You can customize the temperature (104¨H~428¨H) and time (1-999s) depending on your need, you will get the result when you hear the beep at the end of the countdown
PIONEERWORKS Vacuum Heat Transfer Machine for Phone Case/ Cups/T-shirt/Pen
ALL IN ONE HEAT PRESS MACHINE
Be bold and try a new design!
This heat press machine has a new design that allows the pattern to be perfectly transferred to any item by vacuum compression. Compared to traditional one, it is no longer limited by the shape of the product, whether it's a cup, plate, phone case or even a pen, you can achieve your imagination!
No Shape Limit to DIY
This heat press machine uses a new format to reach uniform heating through 2 heat sources at the top and bottom. By the clever way of vacuuming, the shape is no longer limited, so whether it is an odd shaped cup, plate or various models of cell phone cases, the perfect transfer effect can be achieved.
Heat Press Machine for T-shirt 8.7" X 8.7"
The removable iron heat press 8.7" X 8.7" gives you the freedom to customize your t-shirt, cushion, sweater, towel, or blanket...We have prepared some transfer paper for you to try out immediately after you receive the product.
Start Your Business Right Now!
This heat press is perfect for starting your small business. Besides flat t-shirts, you can make a design in any shape of a cup, a bottle, or a phone case of any phone, which is a good idea for a gift for your child or friend.
New experience of parent-child interaction!
Easy to use and safe
We are thoughtfully equipped with an anti-scalding glove for you to protect you and your children from being burned.
4 steps to complete the transfer:
1. Place the printed transfer sticker firmly against the item and secure it with the included thermal tape.
2. Place the item in the appropriate bottle sleeve/mug press
3. Press VACUUM to pull out the air and allow the sticker to fit snugly on the surface of the product. Select the corresponding temperature and time.
4. Wait for the countdown to end, you can get a perfect DIY finished product!
Product Features:
Heat Press All IN ONE
This vacuum heat press has a new design with closed heating by vacuum, not only for flat clothes but also can perfectly transfer patterns on irregular items through vacuum compressions, such as T-shirts, pillows, bags, mugs, tumblers, bottle, mouse pad, glass or crystal plate, phone case, etc. Compared with the traditional type of heat press machine, this machine is safer and easier to move
Excellent Effect
It makes it easy to achieve flawless sublimation transfer with its stylish, space-saving, and sleek design. This stamping machine has two heat sources at the top and bottom, for even and clear transfer of the pattern onto the item
Perfect Gift
This heat press is a serious and surprising gift for craft lovers. You can use it to design your mugs, plates, clothes, and phone cases, which is also a great gift idea for family and friends. The use of this heat press machine requires easy installation, please read the manual or the video on the page in advance
Specifications£º
| Band |
PIONEERWORKS |
| Power |
800w |
| Rated Voltage |
220V-50HZ 110V-60HZ |
| TEMP. Range |
104¨H - 428¨H £¨40 ¨H - 220 ¡??/td>
|
| Time Range |
1~999 s |
| Item model number |
PD2800 |
| Cups Sizes |
3.54" Max. length: 10.23" |
| Plate Sizes |
8.7" X 8.7" Max |
| Iron Size forT-shirt |
7" x 8" |
| Product Dimensions |
16.14 x 14.96 x 13.78 inches |
| Item Weight |
20.9 pounds/9.48kg |
| Package Contents |
Host 1 (800W host),
1 plastic seat,
Sealing ring 1 set,
1 plastic frame,
Vacuum leather 2 pieces,
2800 plug holder 1,
Heat insulation pad 1,
2800 iron water plate 1,
2800 silicone tube 12*7 1,
1 pair of general high temperature gloves,
11OZ silicone cup holder 2pcs,
2800 straight cup clip 1,
1 cup holder with handle,
1 power cord,
1 manual,
Lower silicone skin 1 part, |
?
|
Reviews
There are no reviews yet.